What brand of feed pellet machine is good

With the improvement of living water products, our quality of life is getting higher and higher, not only that the quality of life of domestic animals is also improving. The feed pellet machine is to press some corn, rice, soybeans, etc. into pellets, which are used as food for livestock, which has higher nutritional value and is more conducive to absorption.

Feed pellet machines are mainly used in small and medium-sized rabbit, chicken, and pig farmers. It is characterized by scientific research, reasonable model design, high safety factor and smooth particles. Many people don't understand what a feed making machine is? The feed pellet machine is a kind of feed pelleting equipment. After the pellets such as corn and rice are pressed into pellets, the surface is smooth and the inside is ripe. In addition to conducive to preservation, more importantly, it can improve rabbits, chickens and other poultry and livestock. Absorb nutrients, reduce malnutrition, eliminate all kinds of parasite eggs, and eliminate diseases.

Many farmers like the cattle feed machine very much, and we interviewed one of them. Brother Zhang, a breeder, told us: "It turns out that our pigs often suffer from indigestion, so they don’t eat at all times, and then get sick. Then we bought a animal feed manufacturing process machine. This is really killing three birds with one stone. Look, first of all. We put the leftover corn, stalks, soybeans, etc., you said it would be a pity to throw it away, it would be useless if you don’t throw it away. Now, after making pellets and feeding them to pigs, pigs like them. , And there is no pollution. We have also saved resources. Now pigs eat these pellets, and they don’t often get sick. It brings us good convenience and improves nutrition. This is not three birds with one stone. Now pigs also Eat green food, they are happily eating, and we are also happily watching, saving trouble and effort."

15 ton class millet processing equipment for sale

The 15-ton millet processing equipment consists of continuous production equipment including dust removing, stone cleaning, hulling, rice separating, milling, polishing and grading processes. The equipment has the characteristics of advanced technology, compact combination, high rice yield, crystal rice quality and no bran powder.

Product features of millet flour mill

1. The combined cleaning stone screen has good process effect, thorough stone removal, low energy consumption and less investment.

2. High hulling rate, less crushing, convenient operation and adjustment, low noise.

3, the use of Hunan grain characteristic rice machine -15A meter machine, high accuracy, less crushing, rice yield 2% higher than similar products, precision than similar manufacturers half a grade higher.

4, all using gb materials, long service life, small failure rate, stable and reliable process performance.

5, the use of steel platform, compact and reasonable structure, both beautiful and convenient operation and maintenance, simple installation.

6, after the process is convenient, can produce high-grade millet.

ABC Machinery produce and sell flour mill, complete set of flour pellet line, wheat milling process machine etc.

Complete Set Of 50 Ton Millet Processing Equipment

According to the characteristics of millet, waxy millet, yellow millet, white millet, sorghum rice and other grains, a complete set of automatic process and equipment suitable for enterprise processing is designed. The product has high yield, good color and no impurity. The program was improved from raw grain, including cleaning, removing impurities, removing stones, hulling, husking, separating grain roughness, grinding with sand roller, polishing and grading of millet. It has the characteristics of automatic operation, high rice yield, no pollution, easy operation and maintenance.

Product features

Complete set of 50-ton millet processing equipment Technology features:

1. Advanced technology, this complete set of flour mill adopts the new process of first peeling and then light grinding, completely solving the traditional process of hard grinding with shell, easy to crush and uneven grinding.

2. Advanced equipment. This complete flour mill plant is equipped with our company's efficient cleaning equipment, efficient shelling equipment, new milling equipment and our company's independently developed millet efficient grading equipment. The application of these new technologies and equipment makes the equipment have high rice yield, low broken rice rate and bright finished mijincan.

3, the process is perfect, this complete set of equipment from raw grain cleaning, stone, multi-level peeling, multi-level grinding and polishing, millet grading bagging, power distribution are all automatic continuous operation, smooth process, convenient operation and maintenance.

4, low energy consumption, this complete set of mini flour mill to avoid the traditional high energy consumption equipment, all using new energy-saving equipment, the machine unit energy consumption to the minimum.

5. This equipment is widely used in large, medium and small millet processing plants and millet processing professionals in urban and rural areas.

ABC Machinery YZS-120 Screw oil press Operation

YZS-120 Screw oil press can be used in small oil mill project. How to operate?

1. Start the motor, start the machine, add 6%-8% water into the cake, pour it into the hopper, and polish the chamber. The feed should not be too strong, or it may cause the chamber to be blocked and stuck, so the feeding should be slow and uniform.

2. After operation, observe the situation of the cake. If no cake is produced, press the screw to exit 1-2 laps again. Never drive a car. Extrude work after troubleshooting. In normal operation, the cake is 1-2 mm thick, the cake is shingle, the hand is not sticky, the inside is smooth, the outside is wrinkled, and the surface is not greasy. Adjust the cake thickness: move the handle on the adjusting screw, turn the adjusting bolt clockwise, the bolt outward, the cake is thick, otherwise the cake is thin.(The adjustment bolt is LEFT T165x6) The cone Angle of the cake out ring is different from that of the slag out slightly, and the change of the cake thickness is 0.4-0.5mm for each turn.

3. During the operation of the mustard oil mill, the oil and slag should be frequently checked. Normally, most of the oil flows out of the strip row and the first few sections of the garden. If the cake is broken into slag, the material is too dry. If the cake is found to heat (steam) into large sheets that the water is too high, should be adjusted in time the content of moisture in the embryo material. Slagging: when slagging out of the strip into a fine sheet indicates high water, such as powder foam indicates low water. Excessive slag discharge in the garden means that the nut has not been pressed round, and the nut should be tightened. If the water is suitable, the slag discharge is not or less, and a small amount of slag discharge in the circle is allowed. The water content of the material embryo directly affects the oil yield, so the water content of the material embryo should be controlled during the press.
For ABC Machinery YZS-120 soybean oil machine, please contact our online customer service staff.

Starting Small Edible Oil Business

1.    Edible oil is a vital component for everyday food preparation. As early as people started cooking edible oil has always been around and will continue to do so in the future. Starting your own small edible oil businesses can not be said as easy as talking a sentence. But the unlimited edible oil market is very tempting to tap. Here is helping you to know the factors when you consider starting small edible oil business.

Factors to consider starting an edible oil business

3.    Source of the raw material--- this means owning and managing an actual oil seeds farm or you have easy access to get raw oil material.

4.    If you choose to own a farm, like any other farmer you should know that the profit from such a business lies in being able to properly leverage the cost and upkeep versus the actual sales of your product, which lead us to the next bullet.

5.    Distribution--- now you have a line of product coming out and you are hurting for a payday. Having the right outlets to which to funnel your products is just as important as making them. Most small family held oil mill business often struggle at this area, often having to find niche markets instead of competing with the major ones that are either already saturated by more established players or simply out of reach due to their current scale altogether.

6.    Technology and know--- how finally having the right knowledge in operating this business is essential to running one. And that means knowing how to operate a refinery on top of the farm you already are managing. This means being familiar with the chemistry of the product right down to the processes needed to produce the oil. This should be your primary investment especially when your product goes inside people's mouths.

7.    The cooking oil machine--- when you choose suitable oil crops, you should consider the selection of oil pressing equipment. Different raw materials require different oil extraction equipment. For example, if your raw material is peanuts and you want to produce peanut oil for sale, then you need a machine or a set of equipment to squeeze peanut oil. For people with insufficient funds, an integrated oil press can produce peanut oil. This has the advantages of low investment, quick results, and simple equipment operation. The disadvantage is that the requirements for raw materials are higher and the oil produced is single. Those with sufficient funds can build a small production line. Generally, the supporting equipment of peanut oil processing plant includes peanut shelling machine, Lifting machine, frying pan, mustard oil mill, oil filter, etc., through the mutual cooperation between them, the transformation process from oil crops to edible oil is realized.

8.    Master the right way to start your cooking oil business.

Derusting and Maintenance Experience of Rod Making Machine

As we all know, the parts of the rod making machine are basically made of steel. After long-term use, the sawdust briquette machine will rust due to various external factors. This not only affects the appearance settings but also affects the normal production operation of the equipment. Therefore, in order to avoid rusting of the equipment as much as possible, the equipment should be maintained at ordinary times.

General maintenance method introduction:
1. Keep abreast of weather conditions during the use of the charcoal making machine, and protect the equipment in advance;
2. Do a good job of lubrication, reduce the friction of the equipment and so on. Even when the equipment is idle, the maintenance of the equipment cannot be relaxed.
3. It does not matter when the equipment is rusty, as long as it is handled in time to prevent it from rusting for a long time, it will not affect the normal use of the equipment. . There are many derusting methods, including chemical derusting, high-pressure water abrasive derusting, small-scale pneumatic or electric derusting, applying anti-oxidation paint, etc. The user can take the correct method according to the specific situation.

Operation Precautions Oil Press Machine

Key points before starting

1. Start the motor, start the mustard oil mill, add 6%-8% moisture to the cake, pour it into the hopper, polish the press chamber, and do not feed too much, otherwise it may cause the press chamber to block and jam the machine. Slowly and evenly, after the pressing chamber is polished and the cake is normally discharged, the raw material can be poured into the hopper.
2. Observe the condition of the cake after operation. If the cake does not come out, squeeze the snails for 1-2 turns. If the cake does not come out, stop the soybean oil machine for inspection. Remember to avoid driving the car. After the fault is eliminated, perform the extra pressing work. Normal. When running, the cake is 1-2 mm thick, the cake is tile-like, it is not sticky by hand, the inner surface is smooth, the outer surface is wrinkled, and the surface does not have oil stains.
Cake thickness adjustment: move the handle on the adjusting screw, turn the adjusting bolt clockwise, the bolt is out, the cake will be thick, otherwise the cake will be thin. (Because the adjusting bolt is the left T165x6) The taper angle of the cake ring and the tip of the slag outlet is different, and the thickness of the cake changes by 0.4-0.5 mm per revolution.
3. During the operation of the oil press, the oil and slag should be checked frequently. Normally, most of the oil will flow out of the row and the first few round rows. If the cake is broken into slag, it means that the dough is too dry. If it is found that the cake becomes hot (steam) and becomes large, it means that the moisture is too high, and the moisture content of the blank should be adjusted in time.
  

Slag discharging: When the slag is discharged, it becomes thin flakes, which means high water content. If powdery and foamy, it means low water content. Too much slag discharge in the circle is a round row that is not compacted by the compression nut. The compression nut should be tightened. If the moisture is suitable, the strip will not discharge slag or less slag. A small amount of slag discharge is also allowed in the round row. The moisture content of the embryonic material directly affects the oil yield, so the moisture content of the embryonic material should be controlled during pressing.

(3) Shutdown:
1. In normal shutdown, all embryos should be squeezed, the snails should be retracted several times repeatedly, the corpus in the squeezing chamber should be finished, the cakes should be put to the end, and then the mustard oil making process machine should be stopped.
2. If the power is cut off or suddenly stopped due to other accidents, first cut off the power supply, pull out the discharge baffle, and manually reverse the large pulley to make the mandrel reversal. When the big wheel is difficult, it must not be forced. To avoid damage to the machine), clean it up. If it can’t be pulled out, the press nut should be loosened, and the upper press cage should be removed for fishing. Use a screwdriver to loosen the round row one by one, and clean it. Drive again.

Note for operation of charcoal briquette making machine

How to make charcoal briquettes? charcoal briquette making machine. The charcoal making machine plays a vital role in the whole charcoal production line. The following is a summary for friends to share the operation of the biomass briquette machine notes and see more problems to deal with. Hope to be helpful to the general customers.

Notes for operation of charcoal mechanism stick machine:

Tighten the screw check of all connections, especially the three top wires inside the heating barrel.

Two. Check all the greasy parts.

Check whether the power supply voltage is normal.

No load driving work for 30 minutes, no card, collision and other abnormal phenomena, can be put into normal production. When abnormal is found in the test machine, you should immediately park the car to find the notice, after the drawback swab for no load work.

5. Adjust the temperature adjuster to the required temperature, the honeycomb briquette making machine. When the temperature reaches the predetermined temperature, the machine can be started up with proper feeding and coal molding machine.

6. Gradually increase into the service, until the normal output pass product, when the normal production of 30 minutes, can mark the test victory, hold the normal operation, coal ball machine.

7. Make the hopper free of material before stopping, and reverse it for 1 minute after stopping, so that the material contained in the propeller exits.

The quality of flour processing equipment is the most important

 The quality of flour processing equipment is the most important in the flour mill business! Today we have a young man in his 20s at ABC Machinery who's going to start his own business and start a machine that will automatically feed flour and supply it to the people around him. That's a good idea and it's a great idea to respect and support. So we explained the ideas and skills of doing business in this industry to this young man, and showed him around our equipment. And this afternoon, we took him to a customer in Zhongmu where we installed flour machine production site! The young man was quite satisfied, but because he was young and probably lacked experience and lessons, he did not know much about the technology and quality of flour processing equipment, so he always took the price of the machine as a matter of fact. Because listen to other factory to quote the price of this flour machine on the Internet is very low, even very low, so he wants another good flour machine price is favorable, completely ignored the attention to the quality of flour machine, his this kind of mood, of course, we can understand, according to this problem, we today to talk about the matters needing attention of flour processing equipment in detail.

Flour processing equipment, as a kind of food processing equipment, in today's economic development has become a very popular flour mill, people begin to pay attention to preserve one's health and health, the staple food of flour is more careful, so the flour processing industry is getting better and better, more people joined in the industry to make money, the competition is becoming more and more big! At that time, flour processing equipment industry in the development of recent years, is on, to make money people emerge in endlessly, but for the sake of profit, some companies have fraud, cut corners, shoddy, real ones, for food processing machinery market with a thick layer of shadow, really childish hard-to-sell products. This also shows the Chinese people's desire for cheap, because in the customer interface a requirement of the market, have to begin to produce low-cost products, and high-quality products after all, the cost is high, so in the price also lost its advantage. Quality is the soul of food machinery, is also the premise to determine the quality of food products. With the rapid development of mini flour mill industry, we should pay attention to quality and other issues. In order to make the food processing machinery industry have a better development, refusing fake goods has become the key word of The Times. In the early stage of enterprise development should take long-term development as the goal, so as to win more and wider market.

ABC Machinery's flour mill plant provides free on-site installation, commissioning and training for operators. Our service is all about precision, from pre-sale consultation and enthusiastic service to product introductions on sale. Powerful design and development, manufacturing, installation and commissioning, technical maintenance, irregular return visit, strict quality assurance and quick and in place after-sales service, each link has been carefully arranged, to solve a series of worries for customers. We look forward to your understanding and support of ABC Machinery!

ABC Machinery All-in-one machine

 ABC Machinery All-in-one machine is wide range of pressing, small volume, more suitable for pressing oil mill business:

ABC Machinery oil machine is widely used, a machine multi-purpose, small volume, high oil yield, suitable for the use of mustard oil making process machine, and the machine is convenient, can be mobile oil, peanut, sesame, soybean, oil sunflower and other oil crops. Multiple presses, one squeeze net. 

Press and filter oil clean and hygienic, oil press components are all used high durability data production:
The oil quality is pure, the centrifugal oil filter filters the residue, ensures the oil quality is pure, conforms to the health quarantine standard. Pay attention to materials; As the primary component of the functional durability of the mustard oil mill, the pressed screw is made of the most wear-resistant mold steel Cr12 in China. After being processed and molded by the CNC machine, the pressed screw is carburized by high temperature gas, which ensures the physical function of high hardness and high abrasion resistance of the external surface and the internal surface of the pressed screw. Here, our company carefully promises to ensure that the minimum pressed rapeseed in normal use is more than 400,000 jin, and some users can squeeze as much as 800,000 jin to 1 million jin. When you buy equipment, you buy quality. 

ABC Machinery oil press to quality, the production of peanut oil press equipment best-selling throughout the country, use cycle average more than 10 years, quality is the only goal of enterprise development.
Contact US to learn more about THE ABC Machinery Peanut Oil Press: www.abcmach.com.

Problems in the molding process of machine-made charcoal

There are four common problems found in the process of machine-made charcoal molding. Below I will explain the problems and solutions encountered in several productions.

1 The surface of the biomass briquette is cracked. Excessive moisture in the raw material will cause transverse cracks on the rod, and too little moisture will often lead to the discovery of longitudinal cracks. In addition, the heating temperature is too high, the raw material will be too softened, causing insufficient supply. This can also lead to cracks. The general way to deal with insufficient supply is to appropriately increase the diameter of the spiral, or to polish the spiral wall to increase the pitch between the spirals.
The density in the middle of the 2 rods is low, or contains scattered sawdust. This is due to the wear of the root diameter of the propeller shaft tip, or thickening by welding. Misalignment of the shaft tip can also cause the above problems, and it needs to be adjusted at high temperatures.

3 Due to insufficient material supply, too much moisture in the raw materials, insufficient heating temperature, etc.
4 Larger and hard debris is mixed into the raw material of "Sterling car", or the heating temperature is low. The former needs to be shut down to clear impurities. The latter must continue to heat to soften the raw materials.

How to make charcoal briquettes? ABC Machinery tell you. We are a professional manufacturer of charcoal making machine, we can provide custom briquette production line, turnkey project.

Straw biomass briquette machine

The straw biomass briquette machine designed by our company is a kind of solidification molding equipment which compresses the residue of crop straw forest felling into the straw fuel pressing block through crushing, dust removal, compression and shaping processes. The compressed straw fuel is lumpy, small in volume and high in density, which is convenient for storage and transportation. The burning value per unit area is increased by more than ten times, and the heat production and smelting resistance are close to the medium quality coal. The sawdust briquettes equipment adopts spiral prepressing, piston stamping, two stage compression process, oil forced cooling, to ensure the lubrication of the equipment, to solve the common straw pressing machine on the straw moisture content is higher and the mold wear fast shortage; The charcoal making machine has the characteristics of low power consumption, high production efficiency, long mechanical service life and low maintenance rate. Straw press block can replace coal, oil and other conventional energy, widely used in industrial production, organs, enterprises and public institutions, urban residents heating, residential cooking, high-grade fireplace and tobacco farmers, but also as biomass power plant power generation raw materials.

Raw material: all kinds of biomass straw (forage grass, straw, rice straw, wheat straw, corn stalk, peanut vine, soybean stalk, leaves, cottonseed bark and other forage materials and cotton straw, shrub, forest products, etc.)

The increase in demand for pellet machines has become inevitable

Nowadays, environmental issues have increasingly become a topic of social concern, and the greenhouse effect has become more and more serious. As a material that can replace coal, pellet machines have been widely used at home and abroad. Our company has successfully developed our own environmentally friendly and energy-saving pellet machines based on this environmentally friendly product. Friends from all walks of life are welcome to visit and purchase.

Pellet machines and straw pto pellet mill are mainly targeted at waste wood chips and straw. These two types of materials are also the most produced in my country and are the most urgently needed to be processed. Construction waste, domestic waste, and the furniture industry generate a lot of waste every moment Waste wood, if these waste wood are directly discarded, it will not only pollute the environment, but also greatly waste renewable resources. There is also straw. A large amount of straw is produced in autumn every year. In the past, ordinary people burned straw directly, which not only wastes resources, but also pollutes the environment greatly. The disposal of crop straw is also an issue that the state and local governments have been concerned about. In this case, a machine that can process wood chips and straw and turn waste into treasure is particularly important, and the importance of pellet machines and straw pellet machines at this time appears.

The demand for pelletizer machine has increased: With the increasing price of food, the directly discarded crops can be reprocessed by pellet mill and straw pellet machines to become feed required for breeding. In addition, through pellet machines or straw pelletizers the processed wood chips and straw particles can be directly sent to power plants to replace coal and be used as new energy sources. This greatly reduces the cost and is recognized by more and more customers.

Charcoal machine equipment for sale

How to make briquettes from sawdust? That is charcoal briquette machine? The charcoal making machine raw material is very important, we want to ensure the quality of charcoal, it is necessary to do a good job of charcoal rod. In addition to the good or bad depends on the charcoal machine equipment, process, but also depends on the amount of water contained in the raw materials. Generally, the moisture content of raw materials is less than 12%, but also more than 6%.Therefore, our preliminary operation is to ensure the moisture content of raw materials.

Raw rod making is done in the molding machine (or wood chip briquette press).There are three heating rings outside the forming cylinder of the forming machine, which can make the temperature of the forming cylinder rise to about 350℃.

Let's analyze the relationship between carbon and temperature through raw materials, molding, carbonization and products. The whole process of burning charcoal deals with heat. We can measure the amount of heat by a certain temperature.

In order to ensure the carbon wage rod density, external lubrication, no significant cracks. We can choose the appropriate molding temperature according to the material variety and moisture content. Its bump must pass the field experiment ability to judge. Generally speaking, if we assume that the propeller is qualified, and the water content of the raw materials is between 6 ~ 12%, then we can control the molding temperature of wood chips, wood sawdust, wood shavings and bamboo raw materials between 260 ~ 320℃.

Characteristics of biomass fuel produced by pellet machine

Since its establishment, ABC Machinery has provided customers with high-quality wood pellet mill. Pellet machine equipment uses renewable biomass energy as fuel to realize the sustainable use of energy. It adopts high-temperature segmented combustion technology and has low emissions of NOX, SO2, and dust in the flue gas. It is a fuel (gas) burner, electric heating, etc. The best alternative; no tar, waste water and other waste discharge: using high-temperature pyrolysis combustion technology, tar is directly burned in gaseous form, which solves the technical problem of high tar content in biomass gasification and avoids washing tar belts the secondary pollution of the incoming water and the low operating cost. The ABC Machinery pellet machine has a reasonable design and low cost for modification when used in various equipment. During operation, the heating cost of oil-fired boilers is reduced by more than 60%, and the heating cost of gas-fired boilers is reduced by more than 40%. It is the best choice for energy-saving and environmental protection transformation and upgrading of electric furnaces, oil furnaces and gas furnaces. The pelletizer machine is simple to operate and easy to maintain. It uses variable frequency automatic feeding, wind ash removal, simple operation, small workload, and only one person is on duty. The pto wood pellet mill is the best choice for most enterprises.

More pellet machine details: http://www.gcmec.com.

How to remove impurities from wheat by flour machinery

Flour machinery needs to go through a step in the process of producing high-quality white flour, that is: impurity removal! Flour machinery can only produce higher-quality flour by applying reasonable impurity removal technology to wheat. So how should the flour mill remove wheat impurity correctly and reasonably?

　　①In order to ensure the purity of the milled wheat, all kinds of impurities in the raw materials should be removed, but the focus of removal is all kinds of dust mustard impurities, especially various inorganic impurities that have the greatest impact on the production and product purity.
　　②When arranging the impurity removal sequence, consider first removing the large dust mustard impurities that are directly harmful to production, and then removing other mixed and adherent impurities. First, remove impurities that are very different from the technological characteristics of wheat, so that the types and quantities of impurities in the raw materials are greatly reduced, and then treat the impurities that are not much different from the technological characteristics of wheat.
　　③For impurities that are two or more different from wheat, simpler methods should be used to remove them. For example, for sand and gravel whose grain size is obviously larger or smaller than wheat grains, the effect of screening is better than that of stone removing machine.
　　④ Side-by-side impurities with a suspension speed similar to that of large-grain wheat are difficult to remove, such as side-by-side mud with a small particle size. These impurities need to be removed by selection or comprehensive methods.

      

The above four are the principles of the flour machine for removing impurities from wheat. I hope that all users of flour machines can learn and master certain skills for their own use! ABC Machinery is a professional manufacturer of flour mill plant and wheat processing machinery. It produces and sells flour milling machine such as flour mills, small flour mills, corn flour making process machine, stone mills, flour mills, chemical mills, seasoning mills, grain cleaners, lifting dampening machines, and wheat washing machines. The company has advanced flour machinery production equipment and a complete flour machinery quality management system! And for all our flour machinery and corn processing equipment, we provide free on-site installation, commissioning, training, and operator training for all perfect pre-sales, sales, and after-sales services!

Lubrication is very important for pellet machine operation

Granulator is used to develop wet powder into the desired particles, but also can crush the block dry material to the desired particles. The main feature is that the screen mesh is easy to assemble and disassemble, but also appropriate adjustment of tightness. Hexagonal drum is easy to disassemble and clean. Mechanical transmission system is enclosed in the body, and with lubrication system, smooth operation of the whole cattle feed business machine. The following is for you to introduce the particle machine parts lubrication.

1. The box part of the cattle feed pellet machine is equipped with an oil gauge, which should be refueled once before starting. It can be added halfway according to the temperature rise and operation of each bearing.
2. The worm gear box must be stored for a long time, and the oil level is that the worm gear all invades the oil. If often used, it must be replaced with new oil every three months.
3, when the machine refueling, do not make the oil spill out of the cup, not to flow to the poultry feed making machine around and on the ground. Because oil is easy to make the material pollution, affect the quality of products.

ABC Machinery Charcoal machine equipment

The raw materials of the charcoal making machine are very important. We must ensure the quality of the charcoal, it is necessary to make a good charcoal rod. In addition to the quality of the stick depends on the charcoal machine equipment and process, it also depends on the amount of moisture in the raw material. Generally, the moisture content of the raw materials is required to be less than 12%, but also greater than 6%. Therefore, our initial task is to ensure the moisture content of the raw materials.

The raw material rod making is finished in the forming machine (or sawdust briquettes making machine). There are three heating rings outside the molding cylinder of the molding sawdust briquette press, which can increase the temperature of the molding cylinder to about 350°C.

Let's analyze the relationship between carbon and temperature through raw materials, molding, carbonization, and products. The whole process of burning charcoal is dealing with heat. The amount of heat can be measured by a specific "temperature".

In order to ensure that the charcoal rod has a high density, a lubricating surface, and no significant cracks. We can select the appropriate molding temperature according to the variety of raw materials and moisture content. Its unevenness must be determined through field experiments. Generally speaking, if we assume that the screw propeller is qualified and the moisture content of the raw material is between 6-12%, then we can control the final temperature of wood chips, wood sawdust, wood shavings and bamboo raw materials at 260-320℃ between.

100-ton corn processing equipment

The 100-ton maize flour machine realizes a daily processing capacity of 100 tons of raw corn grains, and uses the all-dry process to process corn kernels, corn flour, and corn grits of different sizes. The 100-ton maize flour milling process equipment is easy to operate, high in output, and low in power consumption. It can complete the cleaning, peeling, germ removal, root removal, black navel removal, crushing, grits removal, grading, polishing, and selection of corn at one time. . The finished corn after finishing is smooth in appearance, uniform in grain, and bright in color.

Process introduction of flour mill project:
1. Raw grain cleaning section: one sieve, one stone removal, and one magnetic separation are adopted, and the large impurities, small impurities, light impurities, pebbles and magnetic substances in the grain are removed through the equipped winnowing system to ensure product quality.
2. Degerming, peeling, and embryo extraction section: adopts the process of two degerming, one peeling, one polishing, three embryo selection, two selection, one suspension, and four sieve classification processes.
①De-germ: break the material into 3-4 to separate the embryo from the endosperm, and try to ensure the integrity of the embryo;
②Peeling and polishing: remove the skin and embryo from the endosperm, and separate the powder, skin and embryo through an effective suction system
③Suspension: Use airflow to separate the skin from the embryonic skin mixture according to the specific gravity of the material;
④ Screening: classification according to the size and quality of the material;
⑤Selection: According to the specific gravity of the material, the skin and broken embryos are separated from the material through the combined action of the fish scale and the air flow;
⑥ Embryo selection: according to the specific gravity of the material, the endosperm is separated from the mixture of endosperm and embryo through the combined action of fish scale and air flow;

3. The grits making section: the process of fine grits, sieving and classification suspension is adopted.
①Refined grits: the material is broken into grits, and the endosperm (white spots) with less hardness is finely powdered;
②Screening: classification according to the size of the material;
③Suspension: Use airflow to separate microskins from grits according to the specific gravity of materials;
4. Pulverizing section: using multiple grinding and sieving processes.
① Grinding: The surface sand that enters the mill is ground into a powder;
②Screening: Separate the ground powder from the material;
5. Metering and packaging section: The storage warehouse can reduce the amount of labor, and the metering and packaging can be manual packaging or electronic packaging.

Is the technique of making charcoal sticks important?

 The machine-made charcoal machine requires a set of equipment to make charcoal, and secondly, it requires the cooperation of manual technology to produce qualified charcoal. How to make briquettes from sawdust by the charcoal machine.
Machine-made charcoal machine makes charcoal equipment: grinder, dryer, rod making machine and carbonization furnace.

 

Charcoal machine production process:
　　1. First, check whether the raw material is particles below 1cm. If not, use a grinder to crush the raw material
　　2. Secondly, check whether the humidity of the raw material of the charcoal making machine after crushing is greater than 12%. If it is greater than that, the raw material needs to be dried.
　　3. Then the pulverized and dried charcoal machine equipment raw materials are processed into charcoal rods (semi-finished products) through a wood chip briquette maker at high temperature and high pressure.
　　4. Put the semi-finished carbon rods into the carbonization furnace for carbonization, and finally form machine-made charcoal (machine-made charcoal machine equipment finished product).
　　Why can't machine-made charcoal be made like traditional charcoal? Because machine-made charcoal is produced according to specifications, the produced charcoal is of high quality, high quality, fast charcoal production, and environmentally friendly. However, the production of machine-made charcoal requires rod making technology and carbonization technology.

The principle of the briquette making machine is to plasticize the raw material at high temperature, and then press it into a hollow outer square or hexagonal rod shape after high pressure. In this process, the moisture content of the raw material must reach 8%-12%. If the moisture content is high, the rod will spread out in a blooming shape. If the moisture content of the raw material is low, the rod will be cracked and not strong enough. The rod-making technology must ensure the size and moisture of the raw materials. 1. The particle size of the raw materials is 5-8mm and the moisture of the raw materials is 15-18%. Therefore, the machine-made charcoal machine-made rod technology is very important.

What is the small wood pellet machine and the raw materials

 1. What is a small wood pellet machine:
The small poultry feed making machine is a special mechanical equipment that converts materials (sawdust, corn stalks, peanut shells, rice straw, cotton stalks, branches, edible fungus waste, cow dung and other raw materials) into high-density, combustible and high-quality pellets.

2. Biomass raw material for small cattle feed business pellet machine:
Including plants, animals and microorganisms. Such as straws, trees and other lignocellulose (lignin for short), scraps of agricultural products processing industry, agricultural and forestry wastes, and livestock manure and wastes in the production process of animal husbandry.
Biomass raw materials contain cellulose, hemicellulose and lignoscine. Because the structure is relatively loose and the density is low, when subjected to external force, the raw materials will undergo the stages of rearrangement, mechanical deformation, and plastic deformation. Inelastic or viscoelastic cellulose molecules are entangled and twisted, which reduces the volume and increases the density. Big.

The thoroughfare of small wood pellet machine
• Civil heating and life energy use; high combustion utilization rate, easy to store
• Biomass industrial boiler; as the main fuel for industrial boilers, it can replace coal and solve environmental pollution.
• Power generation: can be used as a fuel for thermal power generation.