The machine-made charcoal machine requires a set of equipment to make charcoal, and secondly, it requires the cooperation of manual technology to produce qualified charcoal. How to make briquettes from sawdust by the charcoal machine.
Machine-made charcoal machine makes charcoal equipment: grinder, dryer, rod making machine and carbonization furnace.
Charcoal machine production process:
1. First, check whether the raw material is particles below 1cm. If not, use a grinder to crush the raw material
2. Secondly, check whether the humidity of the raw material of the charcoal making machine after crushing is greater than 12%. If it is greater than that, the raw material needs to be dried.
3. Then the pulverized and dried charcoal machine equipment raw materials are processed into charcoal rods (semi-finished products) through a wood chip briquette maker at high temperature and high pressure.
4. Put the semi-finished carbon rods into the carbonization furnace for carbonization, and finally form machine-made charcoal (machine-made charcoal machine equipment finished product).
Why can't machine-made charcoal be made like traditional charcoal? Because machine-made charcoal is produced according to specifications, the produced charcoal is of high quality, high quality, fast charcoal production, and environmentally friendly. However, the production of machine-made charcoal requires rod making technology and carbonization technology.
The principle of the briquette making machine is to plasticize the raw material at high temperature, and then press it into a hollow outer square or hexagonal rod shape after high pressure. In this process, the moisture content of the raw material must reach 8%-12%. If the moisture content is high, the rod will spread out in a blooming shape. If the moisture content of the raw material is low, the rod will be cracked and not strong enough. The rod-making technology must ensure the size and moisture of the raw materials. 1. The particle size of the raw materials is 5-8mm and the moisture of the raw materials is 15-18%. Therefore, the machine-made charcoal machine-made rod technology is very important.
