Derusting and Maintenance Experience of Rod Making Machine

As we all know, the parts of the rod making machine are basically made of steel. After long-term use, the sawdust briquette machine will rust due to various external factors. This not only affects the appearance settings but also affects the normal production operation of the equipment. Therefore, in order to avoid rusting of the equipment as much as possible, the equipment should be maintained at ordinary times.

General maintenance method introduction:
1. Keep abreast of weather conditions during the use of the charcoal making machine, and protect the equipment in advance;
2. Do a good job of lubrication, reduce the friction of the equipment and so on. Even when the equipment is idle, the maintenance of the equipment cannot be relaxed.
3. It does not matter when the equipment is rusty, as long as it is handled in time to prevent it from rusting for a long time, it will not affect the normal use of the equipment. . There are many derusting methods, including chemical derusting, high-pressure water abrasive derusting, small-scale pneumatic or electric derusting, applying anti-oxidation paint, etc. The user can take the correct method according to the specific situation.

Is the technique of making charcoal sticks important?

 The machine-made charcoal machine requires a set of equipment to make charcoal, and secondly, it requires the cooperation of manual technology to produce qualified charcoal. How to make briquettes from sawdust by the charcoal machine.
Machine-made charcoal machine makes charcoal equipment: grinder, dryer, rod making machine and carbonization furnace.

 

Charcoal machine production process:
　　1. First, check whether the raw material is particles below 1cm. If not, use a grinder to crush the raw material
　　2. Secondly, check whether the humidity of the raw material of the charcoal making machine after crushing is greater than 12%. If it is greater than that, the raw material needs to be dried.
　　3. Then the pulverized and dried charcoal machine equipment raw materials are processed into charcoal rods (semi-finished products) through a wood chip briquette maker at high temperature and high pressure.
　　4. Put the semi-finished carbon rods into the carbonization furnace for carbonization, and finally form machine-made charcoal (machine-made charcoal machine equipment finished product).
　　Why can't machine-made charcoal be made like traditional charcoal? Because machine-made charcoal is produced according to specifications, the produced charcoal is of high quality, high quality, fast charcoal production, and environmentally friendly. However, the production of machine-made charcoal requires rod making technology and carbonization technology.

The principle of the briquette making machine is to plasticize the raw material at high temperature, and then press it into a hollow outer square or hexagonal rod shape after high pressure. In this process, the moisture content of the raw material must reach 8%-12%. If the moisture content is high, the rod will spread out in a blooming shape. If the moisture content of the raw material is low, the rod will be cracked and not strong enough. The rod-making technology must ensure the size and moisture of the raw materials. 1. The particle size of the raw materials is 5-8mm and the moisture of the raw materials is 15-18%. Therefore, the machine-made charcoal machine-made rod technology is very important.

How to influence the production efficiency of rod making machine production line

Rods machine production line at work, due to multiple machines production at the same time, the discharge is done automatically by the conveyor, greatly reduces the human resources, as long as the guarantee system of each machine can be stabilized biomass briquette plant, should not be the pursuit of a single biggest production and let the machine running at full capacity, machine under the condition of running at full capacity, because is more sensitive to moisture content of materials and the grinding particle size requirement, as with normal request has the certain difference can cause discharge forming instability, caused to manual adjustment, increase the control staff labor intensity and other machines will be affected by a certain! Therefore, the load of each main machine in the straw rod making machine production line should be controlled within the rated load to avoid full load or overload operation resulting in unstable machine production, in order to improve the production efficiency of the whole rod making machine production line.

 

Mechanism of charcoal equipment on the material itself and the moisture content of raw materials have certain requirements. The raw material lignin content is high, produces the charcoal to contain the carbon content high. In addition, the sawdust briquette press generally requires the moisture of the raw material between 5% and 12%, if the moisture is high, need to be dried first.

 

The mechanism charcoal equipment generally USES sawdust or rice husk as raw materials, neither of which need crushing. Next, shavings, bamboo chips, branches, wood scraps, fruit shells and other good raw materials, but need to be crushed first, the requirements of the mill is higher. ABC Machinery biomass briquette machine for sale.