Operation Precautions Oil Press Machine

Key points before starting

1. Start the motor, start the mustard oil mill, add 6%-8% moisture to the cake, pour it into the hopper, polish the press chamber, and do not feed too much, otherwise it may cause the press chamber to block and jam the machine. Slowly and evenly, after the pressing chamber is polished and the cake is normally discharged, the raw material can be poured into the hopper.
2. Observe the condition of the cake after operation. If the cake does not come out, squeeze the snails for 1-2 turns. If the cake does not come out, stop the soybean oil machine for inspection. Remember to avoid driving the car. After the fault is eliminated, perform the extra pressing work. Normal. When running, the cake is 1-2 mm thick, the cake is tile-like, it is not sticky by hand, the inner surface is smooth, the outer surface is wrinkled, and the surface does not have oil stains.
Cake thickness adjustment: move the handle on the adjusting screw, turn the adjusting bolt clockwise, the bolt is out, the cake will be thick, otherwise the cake will be thin. (Because the adjusting bolt is the left T165x6) The taper angle of the cake ring and the tip of the slag outlet is different, and the thickness of the cake changes by 0.4-0.5 mm per revolution.
3. During the operation of the oil press, the oil and slag should be checked frequently. Normally, most of the oil will flow out of the row and the first few round rows. If the cake is broken into slag, it means that the dough is too dry. If it is found that the cake becomes hot (steam) and becomes large, it means that the moisture is too high, and the moisture content of the blank should be adjusted in time.
  

Slag discharging: When the slag is discharged, it becomes thin flakes, which means high water content. If powdery and foamy, it means low water content. Too much slag discharge in the circle is a round row that is not compacted by the compression nut. The compression nut should be tightened. If the moisture is suitable, the strip will not discharge slag or less slag. A small amount of slag discharge is also allowed in the round row. The moisture content of the embryonic material directly affects the oil yield, so the moisture content of the embryonic material should be controlled during pressing.

(3) Shutdown:
1. In normal shutdown, all embryos should be squeezed, the snails should be retracted several times repeatedly, the corpus in the squeezing chamber should be finished, the cakes should be put to the end, and then the mustard oil making process machine should be stopped.
2. If the power is cut off or suddenly stopped due to other accidents, first cut off the power supply, pull out the discharge baffle, and manually reverse the large pulley to make the mandrel reversal. When the big wheel is difficult, it must not be forced. To avoid damage to the machine), clean it up. If it can’t be pulled out, the press nut should be loosened, and the upper press cage should be removed for fishing. Use a screwdriver to loosen the round row one by one, and clean it. Drive again.

Note for operation of charcoal briquette making machine

How to make charcoal briquettes? charcoal briquette making machine. The charcoal making machine plays a vital role in the whole charcoal production line. The following is a summary for friends to share the operation of the biomass briquette machine notes and see more problems to deal with. Hope to be helpful to the general customers.

Notes for operation of charcoal mechanism stick machine:

Tighten the screw check of all connections, especially the three top wires inside the heating barrel.

Two. Check all the greasy parts.

Check whether the power supply voltage is normal.

No load driving work for 30 minutes, no card, collision and other abnormal phenomena, can be put into normal production. When abnormal is found in the test machine, you should immediately park the car to find the notice, after the drawback swab for no load work.

5. Adjust the temperature adjuster to the required temperature, the honeycomb briquette making machine. When the temperature reaches the predetermined temperature, the machine can be started up with proper feeding and coal molding machine.

6. Gradually increase into the service, until the normal output pass product, when the normal production of 30 minutes, can mark the test victory, hold the normal operation, coal ball machine.

7. Make the hopper free of material before stopping, and reverse it for 1 minute after stopping, so that the material contained in the propeller exits.

The quality of flour processing equipment is the most important

 The quality of flour processing equipment is the most important in the flour mill business! Today we have a young man in his 20s at ABC Machinery who's going to start his own business and start a machine that will automatically feed flour and supply it to the people around him. That's a good idea and it's a great idea to respect and support. So we explained the ideas and skills of doing business in this industry to this young man, and showed him around our equipment. And this afternoon, we took him to a customer in Zhongmu where we installed flour machine production site! The young man was quite satisfied, but because he was young and probably lacked experience and lessons, he did not know much about the technology and quality of flour processing equipment, so he always took the price of the machine as a matter of fact. Because listen to other factory to quote the price of this flour machine on the Internet is very low, even very low, so he wants another good flour machine price is favorable, completely ignored the attention to the quality of flour machine, his this kind of mood, of course, we can understand, according to this problem, we today to talk about the matters needing attention of flour processing equipment in detail.

Flour processing equipment, as a kind of food processing equipment, in today's economic development has become a very popular flour mill, people begin to pay attention to preserve one's health and health, the staple food of flour is more careful, so the flour processing industry is getting better and better, more people joined in the industry to make money, the competition is becoming more and more big! At that time, flour processing equipment industry in the development of recent years, is on, to make money people emerge in endlessly, but for the sake of profit, some companies have fraud, cut corners, shoddy, real ones, for food processing machinery market with a thick layer of shadow, really childish hard-to-sell products. This also shows the Chinese people's desire for cheap, because in the customer interface a requirement of the market, have to begin to produce low-cost products, and high-quality products after all, the cost is high, so in the price also lost its advantage. Quality is the soul of food machinery, is also the premise to determine the quality of food products. With the rapid development of mini flour mill industry, we should pay attention to quality and other issues. In order to make the food processing machinery industry have a better development, refusing fake goods has become the key word of The Times. In the early stage of enterprise development should take long-term development as the goal, so as to win more and wider market.

ABC Machinery's flour mill plant provides free on-site installation, commissioning and training for operators. Our service is all about precision, from pre-sale consultation and enthusiastic service to product introductions on sale. Powerful design and development, manufacturing, installation and commissioning, technical maintenance, irregular return visit, strict quality assurance and quick and in place after-sales service, each link has been carefully arranged, to solve a series of worries for customers. We look forward to your understanding and support of ABC Machinery!

ABC Machinery All-in-one machine

 ABC Machinery All-in-one machine is wide range of pressing, small volume, more suitable for pressing oil mill business:

ABC Machinery oil machine is widely used, a machine multi-purpose, small volume, high oil yield, suitable for the use of mustard oil making process machine, and the machine is convenient, can be mobile oil, peanut, sesame, soybean, oil sunflower and other oil crops. Multiple presses, one squeeze net. 

Press and filter oil clean and hygienic, oil press components are all used high durability data production:
The oil quality is pure, the centrifugal oil filter filters the residue, ensures the oil quality is pure, conforms to the health quarantine standard. Pay attention to materials; As the primary component of the functional durability of the mustard oil mill, the pressed screw is made of the most wear-resistant mold steel Cr12 in China. After being processed and molded by the CNC machine, the pressed screw is carburized by high temperature gas, which ensures the physical function of high hardness and high abrasion resistance of the external surface and the internal surface of the pressed screw. Here, our company carefully promises to ensure that the minimum pressed rapeseed in normal use is more than 400,000 jin, and some users can squeeze as much as 800,000 jin to 1 million jin. When you buy equipment, you buy quality. 

ABC Machinery oil press to quality, the production of peanut oil press equipment best-selling throughout the country, use cycle average more than 10 years, quality is the only goal of enterprise development.
Contact US to learn more about THE ABC Machinery Peanut Oil Press: www.abcmach.com.

Problems in the molding process of machine-made charcoal

There are four common problems found in the process of machine-made charcoal molding. Below I will explain the problems and solutions encountered in several productions.

1 The surface of the biomass briquette is cracked. Excessive moisture in the raw material will cause transverse cracks on the rod, and too little moisture will often lead to the discovery of longitudinal cracks. In addition, the heating temperature is too high, the raw material will be too softened, causing insufficient supply. This can also lead to cracks. The general way to deal with insufficient supply is to appropriately increase the diameter of the spiral, or to polish the spiral wall to increase the pitch between the spirals.
The density in the middle of the 2 rods is low, or contains scattered sawdust. This is due to the wear of the root diameter of the propeller shaft tip, or thickening by welding. Misalignment of the shaft tip can also cause the above problems, and it needs to be adjusted at high temperatures.

3 Due to insufficient material supply, too much moisture in the raw materials, insufficient heating temperature, etc.
4 Larger and hard debris is mixed into the raw material of "Sterling car", or the heating temperature is low. The former needs to be shut down to clear impurities. The latter must continue to heat to soften the raw materials.

How to make charcoal briquettes? ABC Machinery tell you. We are a professional manufacturer of charcoal making machine, we can provide custom briquette production line, turnkey project.

Straw biomass briquette machine

The straw biomass briquette machine designed by our company is a kind of solidification molding equipment which compresses the residue of crop straw forest felling into the straw fuel pressing block through crushing, dust removal, compression and shaping processes. The compressed straw fuel is lumpy, small in volume and high in density, which is convenient for storage and transportation. The burning value per unit area is increased by more than ten times, and the heat production and smelting resistance are close to the medium quality coal. The sawdust briquettes equipment adopts spiral prepressing, piston stamping, two stage compression process, oil forced cooling, to ensure the lubrication of the equipment, to solve the common straw pressing machine on the straw moisture content is higher and the mold wear fast shortage; The charcoal making machine has the characteristics of low power consumption, high production efficiency, long mechanical service life and low maintenance rate. Straw press block can replace coal, oil and other conventional energy, widely used in industrial production, organs, enterprises and public institutions, urban residents heating, residential cooking, high-grade fireplace and tobacco farmers, but also as biomass power plant power generation raw materials.

Raw material: all kinds of biomass straw (forage grass, straw, rice straw, wheat straw, corn stalk, peanut vine, soybean stalk, leaves, cottonseed bark and other forage materials and cotton straw, shrub, forest products, etc.)

The increase in demand for pellet machines has become inevitable

Nowadays, environmental issues have increasingly become a topic of social concern, and the greenhouse effect has become more and more serious. As a material that can replace coal, pellet machines have been widely used at home and abroad. Our company has successfully developed our own environmentally friendly and energy-saving pellet machines based on this environmentally friendly product. Friends from all walks of life are welcome to visit and purchase.

Pellet machines and straw pto pellet mill are mainly targeted at waste wood chips and straw. These two types of materials are also the most produced in my country and are the most urgently needed to be processed. Construction waste, domestic waste, and the furniture industry generate a lot of waste every moment Waste wood, if these waste wood are directly discarded, it will not only pollute the environment, but also greatly waste renewable resources. There is also straw. A large amount of straw is produced in autumn every year. In the past, ordinary people burned straw directly, which not only wastes resources, but also pollutes the environment greatly. The disposal of crop straw is also an issue that the state and local governments have been concerned about. In this case, a machine that can process wood chips and straw and turn waste into treasure is particularly important, and the importance of pellet machines and straw pellet machines at this time appears.

The demand for pelletizer machine has increased: With the increasing price of food, the directly discarded crops can be reprocessed by pellet mill and straw pellet machines to become feed required for breeding. In addition, through pellet machines or straw pelletizers the processed wood chips and straw particles can be directly sent to power plants to replace coal and be used as new energy sources. This greatly reduces the cost and is recognized by more and more customers.