Complete Set Of 50 Ton Millet Processing Equipment

According to the characteristics of millet, waxy millet, yellow millet, white millet, sorghum rice and other grains, a complete set of automatic process and equipment suitable for enterprise processing is designed. The product has high yield, good color and no impurity. The program was improved from raw grain, including cleaning, removing impurities, removing stones, hulling, husking, separating grain roughness, grinding with sand roller, polishing and grading of millet. It has the characteristics of automatic operation, high rice yield, no pollution, easy operation and maintenance.

Product features

Complete set of 50-ton millet processing equipment Technology features:

1. Advanced technology, this complete set of flour mill adopts the new process of first peeling and then light grinding, completely solving the traditional process of hard grinding with shell, easy to crush and uneven grinding.

2. Advanced equipment. This complete flour mill plant is equipped with our company's efficient cleaning equipment, efficient shelling equipment, new milling equipment and our company's independently developed millet efficient grading equipment. The application of these new technologies and equipment makes the equipment have high rice yield, low broken rice rate and bright finished mijincan.

3, the process is perfect, this complete set of equipment from raw grain cleaning, stone, multi-level peeling, multi-level grinding and polishing, millet grading bagging, power distribution are all automatic continuous operation, smooth process, convenient operation and maintenance.

4, low energy consumption, this complete set of mini flour mill to avoid the traditional high energy consumption equipment, all using new energy-saving equipment, the machine unit energy consumption to the minimum.

5. This equipment is widely used in large, medium and small millet processing plants and millet processing professionals in urban and rural areas.

ABC Machinery YZS-120 Screw oil press Operation

YZS-120 Screw oil press can be used in small oil mill project. How to operate?

1. Start the motor, start the machine, add 6%-8% water into the cake, pour it into the hopper, and polish the chamber. The feed should not be too strong, or it may cause the chamber to be blocked and stuck, so the feeding should be slow and uniform.

2. After operation, observe the situation of the cake. If no cake is produced, press the screw to exit 1-2 laps again. Never drive a car. Extrude work after troubleshooting. In normal operation, the cake is 1-2 mm thick, the cake is shingle, the hand is not sticky, the inside is smooth, the outside is wrinkled, and the surface is not greasy. Adjust the cake thickness: move the handle on the adjusting screw, turn the adjusting bolt clockwise, the bolt outward, the cake is thick, otherwise the cake is thin.(The adjustment bolt is LEFT T165x6) The cone Angle of the cake out ring is different from that of the slag out slightly, and the change of the cake thickness is 0.4-0.5mm for each turn.

3. During the operation of the mustard oil mill, the oil and slag should be frequently checked. Normally, most of the oil flows out of the strip row and the first few sections of the garden. If the cake is broken into slag, the material is too dry. If the cake is found to heat (steam) into large sheets that the water is too high, should be adjusted in time the content of moisture in the embryo material. Slagging: when slagging out of the strip into a fine sheet indicates high water, such as powder foam indicates low water. Excessive slag discharge in the garden means that the nut has not been pressed round, and the nut should be tightened. If the water is suitable, the slag discharge is not or less, and a small amount of slag discharge in the circle is allowed. The water content of the material embryo directly affects the oil yield, so the water content of the material embryo should be controlled during the press.
For ABC Machinery YZS-120 soybean oil machine, please contact our online customer service staff.