How to make briquettes from sawdust? Machine charcoal machine production line equipment is composed of: pulverizer, storage bin, roller screen, belt conveyor, sawdust dryer, cold material system, screw feeder, briquette making machine, steel mesh conveyor, environmental protection carbonization furnace and other equipment.
1. Pulverizer: For machine charcoal, the size of raw materials should be below 3MM. In addition to sawdust and rice husk, other raw materials need to be processed by crusher first.
2. Roller screen: when the material enters the roller device, due to the tilt and rotation of the roller device, the material on the screen surface turns and rolls, so that the qualified material (the product under the screen) is discharged through the sieve of the outer circle of the roller, and the unqualified material (the product on the screen) is discharged through the end of the roller. Because of the material in the roller, roll, so that the material stuck in the screen hole can be ejected, to prevent the screen hole blocked. The sawdust drum screen is mainly used for the screening of raw materials in the production mechanism of charcoal making business machine.
3. Belt conveyor: it is to transport the screened sawdust to the sawdust dryer, with strong conveying capacity, long conveying distance, simple structure and easy maintenance, which can conveniently implement programmed control and automatic operation. The continuous or intermittent movement of the conveyor belt is used to transport items of less than 100KG or powdery or granular items. Its operation is high-speed, stable, low noise, and can be transported uphill or downhill.
4. Dryer: Before rod making, the humidity of raw materials is also strictly required, which cannot be more than 12%. If it is more than 12%, the raw materials should be dried.
5. Cooling material system: This system is the sawdust cooling treatment system after drying the dryer.
6. Screw divider: This equipment is used in the transportation of sawdust or fine particle materials, which needs to carry out quantitative split control on two or more branches. The screw divider can realize the proportional control of two or more channels of material flow and satisfy the arbitrary proportional distribution of material flow. It works under the ideal condition.
7. The briquetting machine for sale: the raw materials are crushed and dried, and the next stage is the rod making stage. The crushed and dried raw materials are processed into carbon rods (semi-finished products) through the wood chip log making machine at high temperature and high pressure. The bagasse briquettes machine can make carbon rods into hollow wage rods of 50MM, 60MM, 70MM, 80MM and 90MM according to customer requirements.
8. Steel mesh conveyor: This conveyor is used for conveying semi-finished mandrel produced by multiple rod making mechanisms.
9. High temperature carbonization furnace: the made salary rod is put into the carbonization furnace, through dry distillation or spontaneous combustion into the finished charcoal. The steam (white smoke) generated by the drying of the upper carbonization tube of the carbonization furnace is discharged; Coking furnace bottom coking tube coking produce gas, open the combustible gas valve, wait until nearly invisible when the smoke flue gas produced in coking process has been fully recycling, recovery of flue gas by spraying, cooling, purification process into combustible gas enters into the bottom of coking furnace informed for secondary combustion, then close the gasifier. In this way, the self-generated gas can be used to burn the self-generated gas to achieve the effect of energy saving; The whole process can be continuous carbonization production, pollution-free smoke emission, extremely environmental protection, meet the national exhaust emission standards.
