Machine charcoal machine production line

How to make briquettes from sawdust? Machine charcoal machine production line equipment is composed of: pulverizer, storage bin, roller screen, belt conveyor, sawdust dryer, cold material system, screw feeder, briquette making machine, steel mesh conveyor, environmental protection carbonization furnace and other equipment.

 

1. Pulverizer: For machine charcoal, the size of raw materials should be below 3MM. In addition to sawdust and rice husk, other raw materials need to be processed by crusher first.

2. Roller screen: when the material enters the roller device, due to the tilt and rotation of the roller device, the material on the screen surface turns and rolls, so that the qualified material (the product under the screen) is discharged through the sieve of the outer circle of the roller, and the unqualified material (the product on the screen) is discharged through the end of the roller. Because of the material in the roller, roll, so that the material stuck in the screen hole can be ejected, to prevent the screen hole blocked. The sawdust drum screen is mainly used for the screening of raw materials in the production mechanism of charcoal making business machine.

 

3. Belt conveyor: it is to transport the screened sawdust to the sawdust dryer, with strong conveying capacity, long conveying distance, simple structure and easy maintenance, which can conveniently implement programmed control and automatic operation. The continuous or intermittent movement of the conveyor belt is used to transport items of less than 100KG or powdery or granular items. Its operation is high-speed, stable, low noise, and can be transported uphill or downhill.

4. Dryer: Before rod making, the humidity of raw materials is also strictly required, which cannot be more than 12%. If it is more than 12%, the raw materials should be dried.

5. Cooling material system: This system is the sawdust cooling treatment system after drying the dryer.

 

6. Screw divider: This equipment is used in the transportation of sawdust or fine particle materials, which needs to carry out quantitative split control on two or more branches. The screw divider can realize the proportional control of two or more channels of material flow and satisfy the arbitrary proportional distribution of material flow. It works under the ideal condition.

7. The briquetting machine for sale: the raw materials are crushed and dried, and the next stage is the rod making stage. The crushed and dried raw materials are processed into carbon rods (semi-finished products) through the wood chip log making machine at high temperature and high pressure. The bagasse briquettes machine can make carbon rods into hollow wage rods of 50MM, 60MM, 70MM, 80MM and 90MM according to customer requirements.

8. Steel mesh conveyor: This conveyor is used for conveying semi-finished mandrel produced by multiple rod making mechanisms.

 

9. High temperature carbonization furnace: the made salary rod is put into the carbonization furnace, through dry distillation or spontaneous combustion into the finished charcoal. The steam (white smoke) generated by the drying of the upper carbonization tube of the carbonization furnace is discharged; Coking furnace bottom coking tube coking produce gas, open the combustible gas valve, wait until nearly invisible when the smoke flue gas produced in coking process has been fully recycling, recovery of flue gas by spraying, cooling, purification process into combustible gas enters into the bottom of coking furnace informed for secondary combustion, then close the gasifier. In this way, the self-generated gas can be used to burn the self-generated gas to achieve the effect of energy saving; The whole process can be continuous carbonization production, pollution-free smoke emission, extremely environmental protection, meet the national exhaust emission standards.

The role of the press roller in the press roller granulator

The correct use of the press roller is one of the most critical factors affecting the use of ring mold cattle feed plant. We found in the long-term production and service, there are a lot of ring die in the use of uneven working face, low hole rate, productivity decline, new ring mold cattle feed manufacturing plant can not produce material, and so on, most of the reason is due to the use of the pressure roller caused by the irregularities.

New ring die in the use of ring die animal feed business pellet machine is characterized by: face level off, but the smoothness of eye hole and guide in the mouth, did not meet the requirements of normal granulating smoothness, the eyes of the new ring die hole to the material resistance and friction are large (especially the small aperture ring die), and the old roller shell at both ends are serious wear and tear, and the material easily from two head and wear of roll shell sliding into relief groove, make new eye on both sides of the ring die orifice discharge confusing or discharge. Therefore, the new ring die must be used with a new roller shell. Ensure that the matching use of more than 100 hours, ensure that the new ring die face pressure uniform, hole rate and polishing rate meet the requirements. In order to play out the ring of the best use of efficiency. In principle, each ring die must be used at the beginning of a separate roller, can not be used in other ring die series with the same roller shell.
 

The choice of feed granulator quality and performance is more important than the price

ABC Machinery granulator equipment can be in the large animal feed business market to become grading equipment is due to the ABC Machinery granulator has a unique side, what is the feed granulator so attracted many feed granulator customers eyeball? As a professional feed granulator manufacturers have to for the majority of feed granulator customers to solve the puzzle. Feed pellet machine equipment in the press block equipment market products, manufacturers are numerous, the price is diversified, quality and performance is not to say more, which makes poultry feed plant buyers bored heart.

Feed pellet machine is, in theory, the application of advanced technology and sophisticated manufacturing technology and equipment developed to suppress feed particles machine, heavy machinery and equipment, or feed pellets machine application field is very broad, feed grain, biomass briquetting machine feed, organic fertilizer granulator, and other fields have the form of feed pellet machine, it is the first selection of artificial granulating, granule machine production line of products.
It is not difficult to find that the selection of poultry feed making machine is a very important issue from the breadth of the feed pellet machine and the importance of the feed pellet machine, how to choose a good high-end compaction machine is each ready to invest in feed machinery production enterprises to consider the first problem. ABC Machinery granule machine remind you: buy feed granule machine can not only see the price, feed granule machine quality and performance is the key, no quality and performance guarantee, no matter how low the price can not buy, think small investment big return, if not small investment big return that big investment big return is also a good choice. Select feed granule Machinery to pay more attention to ABC Machinery granule Machinery: www.gcmec.com. Learn more feed pellet machine purchasing skills, learn more livestock feed production machine product knowledge, in order to better choose it!