The popularity of
straw pellet machine is increasing. A lot of places are available to the straw pellet machine. According to the pellet production experience for many years, we summed up the straw pellet machine common failure problems and hope to be of help.
The first kind of the common problems is that the diameter of the pellets produced by straw pellet machine is too big, not in conformity with the expectation of their particle size. The problem might be caused by two reasons. One reason is that the mesh of pelletizing machine serious wear and tear after working for a long time, making the mesh aperture bigger. So the finished pellets will certainly be bigger. In this cases, you can replace the mesh to fix the problem. Another reason is the clearance between the press roller and the pellet die is too big. In this cases, you can fix it by tighting the fastening screws, to reduce the gap between the two, so as to reduce the diameter of the biomass pellets.
The second common problem is bearing overheating of the straw pellet machine. Sometimes even feels burn the hand. The factors of bearing temperature may be various. It is possible because that the bearing oil shortage, causing friction force too large, producing a lot of calories. The other reason is that the machine is overload for a long time. You must first stop the machine for a period of time, otherwise it may cause damage to the machine and greater economic losses.
If you are looking for straw pellet machine manufacturer on line.
www.gcmec.com might be your best choice. You can find both small pellet press and large ring die pellet mahcine on their website. If you are planning to build a production line, go to
www.pelletmillsolution.com. They are specialized in building wood pellet lines. You can view the projects on their website and then decide if buy from them. Hope this article really helps.
